Convert Logo to Waterjet File
Waterjet cutting requires vector path files — closed contour SVG or DXF. Waterjet machines cut by following vector path contours. A logo PNG is a raster image and cannot be fed directly to a waterjet controller.
Free Protected Preview
Protected Vector Preview
No account is required to create or view the protected preview. The preview accepts one PNG, JPEG, or WebP file up to 4 MiB; other source formats must be exported or converted to one of those formats first. Editable SVG export requires paid or complimentary access. Review the exported SVG in the appropriate downstream software; non-SVG formats and machine instructions require separate conversion.
Open Protected Vector PreviewAbout Convert logo to waterjet file
Waterjet machines cut by following vector path contours. A logo PNG is a raster image and cannot be fed directly to a waterjet controller.
Step 1 — Vectorize the logo: upload the PNG or JPG logo to the vectorizer. For waterjet cutting, you typically want just the outer contour of the logo — not every internal detail. Select Brightness Cutoff mode. This produces a single closed path tracing the logo boundary.
Step 2 — Simplify for waterjet: waterjet toolpaths benefit from simplified paths. In Inkscape, select the traced path and use Path > Simplify. Reduce nodes to the minimum that preserves the logo shape. Fewer nodes produce smoother cuts and faster machine movement.
Step 3 — Verify closed paths: waterjet machines require closed paths. Open path endpoints cause the controller to either stop mid-cut or produce an error. Use Extensions > Generate from Path > Interpolate in Inkscape to check.
Step 4 — Export to DXF: most waterjet CAM software (OMAX Layout, FlowCut, IGEMS, WaterJet Suite) imports DXF R14. Export from Inkscape via File > Save As > DXF R14.
For metal, stone, or glass waterjet cutting: ensure the SVG path represents only the cut boundary. Remove all interior paths that should not be cut separately.