Workflow

Prepare Mixed Artwork for Banners and Posters

Check large-format physical dimensions, effective photo resolution, logo fidelity and the supplier’s template before exporting the print layout.

Free Protected Preview

Preview vectorization for free

Preview PNG, JPG (JPEG), or WebP up to 4 MiB for free, without an account. Register for three lifetime free SVG exports, with no payment required. Additional new exports require Vectorize Pro.

Open Image to SVG Converter

Separate physical size from image size

Get the final banner or poster dimensions, finishing exclusions and requested delivery scale from the supplier. Printed signage can use mixed raster and vector content; a large surface does not make vector conversion mandatory. Keep photos as raster and retain useful vector logos where available. Both need review at their actual placement size.

Worked large-format resolution check

Illustrative calculation: a 6-foot-wide banner is 72 inches wide. A full-width 5400-pixel photo has 75 PPI at that size; 10,800 pixels would give 150 PPI. These numbers do not establish what the printer requires. If the same photo occupies only half the width, its effective resolution doubles. Assess each placed image, not just the overall document.

Ask the supplier how viewing distance and intended use affect its review. A poster read close up and a distant event banner can expose different defects. Enlarging the entire raster or changing its DPI label cannot recover a missing face detail or repair a mis-traced letter. Request a better source or adjust the composition when necessary.

Check the mixed layout and its scale

  • Verify photos, logos and text separately. A vector logo can still have closed gaps, distorted lettering or unwanted background shapes.
  • If the supplier requests a scaled document, state the ratio explicitly and calculate effective resolution at final size. Do not send an ambiguous miniature page.
  • Keep critical content clear of the supplied finishing and safe-area guides. Hems, hardware or other finishing requirements must come from the selected product template.
  • For a vehicle-wrap logo handoff, state intended artwork dimensions and give the wrap professional the reference. This page does not replace vehicle templates, panel engineering, installation planning or sign fabrication.

Reopen the requested delivery copy

Use downstream software for a requested PDF or other non-SVG format. Inkscape’s export guide supports retaining an SVG master and verifying exported copies; it does not establish import acceptance at a named printer: https://inkscape-manuals.readthedocs.io/en/latest/export-other-formats.html

Read back the exported page size or scale ratio, image placement, text and profile instructions. Compare an at-size detail crop and the whole layout, then use the supplier’s proof process. No print service acceptance or physical banner/poster sample is demonstrated.

Check artwork at banner size

Set the final physical dimensions and inspect the smallest text and raster images at the intended viewing distance. Vector outlines scale, but embedded photographs still need adequate resolution.

Use the printer’s template

Place the artwork in the selected supplier’s template and keep important content clear of finishing areas. Confirm bleed, color profile and delivery format with the printer before approving the proof.

Primary sources