Convert JPG to Plasma Cut Vector
Convert any JPEG image into a plasma cut vector for table plasma cutting. The vectorizer traces the JPG to clean SVG paths that export to DXF for SheetCam, Fusion 360, Mach3, or any CAM software driving a plasma table.
About Convert JPG to plasma cut vector
Converting a JPEG to a plasma cut vector requires tracing the raster image to closed SVG paths, then exporting to DXF for plasma table CAM software. JPEG images cannot be loaded directly into SheetCam, Fusion 360, or Mach3 — they must first be converted to vector geometry.
JPG to plasma cut vector conversion workflow: 1. Upload the JPEG image to the vectorizer above. 2. Select 2–4 trace colours (fewer colours = simpler paths = better plasma cuts). 3. Download the SVG. 4. Open in Inkscape for plasma-specific cleanup: — Path > Simplify to remove excess anchor points. — Close any open path segments using the Node Editor. — Remove fill strokes — plasma CAM reads path geometry only. — Delete sub-2 mm path fragments that plasma kerf will destroy. 5. Export to DXF (AutoCAD R14) for CAM import. 6. Load DXF into SheetCam or Fusion 360. 7. Set kerf compensation, lead-ins/lead-outs, and pierce delay. 8. Post-process G-code for the plasma controller (Mach3, UCCNC, LinuxCNC).
JPEG image selection for plasma conversion: — High-contrast JPEGs (black on white) trace most cleanly. — Avoid heavily compressed JPEGs — JPEG artefacts produce noisy SVG traces. — Simple bold graphics — logos, icons, silhouettes — convert most reliably for plasma use.